Dedicated wifi for automation allows me to have devices such as Xiaomi Vaccuum, or security camera not phoning home. OpenWRT with good firewall rules completely isolate my “public” containers/VMs from my lan.

Server was built over time, disk by disk. I’m now aiming to buy only 12TB drives, but I got to sacrifice the first two as parity…

I just love the simplicity of snapraid / mergerfs. Even if I were to loose 3 disks (my setup allows me the loss of 2 disks), I’d only loose data that’s on these disks, not the whole array. I lost one drive once, recovery went well and was relatively easy.

I try to keep things separated and I may be running a bit too many containers/vms, but well, I got resources to spare :)

  • transmatrix@lemmy.world
    link
    fedilink
    English
    arrow-up
    41
    ·
    1 year ago

    As an FYI: this set up is vulnerable to ARP spoofing. I personally wouldn’t use any ISP-owned routers other than for NAT.

    • tiller@programming.devOP
      link
      fedilink
      English
      arrow-up
      7
      ·
      1 year ago

      I’m not well versed in ARP spoofing attack and I’ll dig around, but assuming the attacker gets access to a “public” VM, its only network adapter is linked to the openwrt router that has 3 separated zones (home lan, home automation, dmz). So I don’t think he could have any impact on the lan? No lan traffic is ever going through the openwrt router.

      • transmatrix@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        ·
        edit-2
        1 year ago

        The risk is the ISP Wi-Fi. As long as you’re using WPA with a good long random passkey, the risk is minimal. However, anyone who had access to your Wi-Fi could initiate an ARP spoof (essentially be a man-in-the-middle)

        ETA: the ARP table in networking is a cache of which IP is associated with which MAC Address. By “poisoning” or “spoofing” this table in the router and/or clients, a bad actor can see all unencrypted traffic.

        • tiller@programming.devOP
          link
          fedilink
          English
          arrow-up
          13
          ·
          edit-2
          1 year ago

          Well, to be honest if someone has access to my Wi-Fi, I’d consider that I’ve already lost. As soon as you’re on my lan, you have access to a ton of things. With this setup I’m not trying to protect against local attacks, but from breaches coming from the internet

        • foggenbooty@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          How would you change his setup to prevent ARP attacks? More network segmentation (clients and servers on separate VLANs) or does OPNsense additional protections I should look into?

          • transmatrix@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Don’t have the Wi-Fi network “upstream” of the LAN. You want the connection between the LAN and Wi-Fi to be through the WAN so you get NAT protection.

            • Ac5000@lemm.ee
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Any way you could update/create your own drawing with what you mean? (Bad paint drawings are acceptable!)

              I ask because I am curious if I am subject to the same problem. I’m not the most networking savvy so I need the extra help/explanation and maybe the drawing will help others.