The article literally says that the plans match the tactics and movements seen/recorded in the raid of this kibbutz and others. Dumb for them to bring the documents with? Yes. Still the exact way it happened? Also yes.
The article literally says that the plans match the tactics and movements seen/recorded in the raid of this kibbutz and others. Dumb for them to bring the documents with? Yes. Still the exact way it happened? Also yes.
The recent Dungeons and Dragons does something similar well. Independence Day is a classic in that vein. Many/most superhero movies follow that formula as well.
A different scale, but a lot of sports movies have a similarly satisfying underdog/comeback story.
Yes, which the article does not say they’ve failed to do. In fact, the article says that the videos submitted as evidence seem to support its legal use not in Gaza, but near Lebanon, and that Human Rights Watch submitted no videos at all showing white phosphorus in Gaza.
The videos attached to the claim show it being used for smokescreens, which Reuters comments is legal.
Perhaps not the whole world, but I’m many/most countries, the larger structures, like government and business, absolutely are anti-intellectual. Nice to have an academic friend group, but that doesn’t change the fact that capitalism makes education less accessible in order to rely on an undereducated workforce, and then politicians push it even further for the sake of easy control.
“Sounds like a skill issue”
The small holes are probably more forgiving of grinding than pouring, so if you’re getting good results, I’d feel confident in your pouring with a different cone. People make a big deal about pouring technique, but as long as you’re relatively consistent and not entirely careless, a v60 is not the finicky monster it’s made out to be haha.
Hope the stir is great for ya, and happy pouring!
Totally fine. The 3 small holes rather than 1 large one (like on a v60) can make them draw down/drain a little slower, but they are still super functional.
Only advice would be that the flat sides can make it harder to swirl your slurry during the bloom, which a lot of recipes call for. So I’d just look for recipes that use pouring alone (or maybe a little stir) to agitate the grounds, like Matt Winton’s 5-pour recipe/video.
In (Madrid, at least) Spain, it’s a sorta huge deal in schools, with every kid under 14-15 dressing up, a lot of schools doing costume parades, and many classes giving out candy and watching movies. But outside of school, it’s all but ignored. You’ll see little kids in costumes and a few bar events, but no trick or treating and no decorations.
The much bigger day/event is carnival, for which kids wear costumes again and there’s a big parade in most cities.
I think jumping coarser and then “fine” tuning (pun half-intended) works well IF you start super fine.
If you’re starting in the middle of the spectrum from fine to coarse, and you only ever try going coarser first, you never get to try what might be the best cup, which may be on the finer side of your starting point.
Winning cups in pour over competitions are often ground shockingly fine, like only 30%-50% coarser than espresso fine. You may be using dark roast or Ethiopian beans (known to produce tons of fines and need coarser settings), but if not, I’d really suggest going finer just to see how it goes. You’ll find a lot of experts suggest the same.
Ah that’s so great to hear! It was an epiphany for me when I got a better cup this way, so I’m just so glad I got to share it with at least one person!
Thank you for the update, and happy pouring!
Niche is definitely good enough to get a quality cup, and sounds like you’ve got a great setup for what you’re brewing. If you do ever try a cone, you can still get some great results with a $9 V60 and a classic kettie spout, too, especially if you pulse your pours.
And yeah, like you say, a Brazil is almost always going to be chocolate forward, so that makes sense. They are also often roasted medium to city/dark, so I wouldn’t typically recommend easing off the water temp, but a few degrees can make a bigger difference with darker roasts, in case it is one. But it does sound like you’ll find what you’re looking for more with a higher elevation and lighter roast. I’m personally a huge fan of Dune coffees.
Hope grinding finer is great! And if not, you’re one step further along in the process of elimination haha.
Of course. Honestly wish these were out when I got my espresso grinder, as a 1Z and a drill is probably better than anything under $1k when it comes to grind quality alone (perhaps not user experience, but the drill helps)
Nice, sounds like you’re definitely a candidate for manual espresso grinding, in which case that’s what I’d go for. You’ll definitely have a hard/impossible time finding anything anything as precise and consistent as 1ZPresso’s esspresso-focused grinders at that price or looking at electric grinders.
Any drill/screwdriver with a 6.35mm socket (the widely standard size) can be attached to the same spot that the standard handle slides onto. That piece on the grinder is actually shaped like a standard hex bit, so it should fit just like any of the screwdriving heads would.
If it’s light, but not sour, acidic, overly watery, or astringent, I might stick with what you have, and it tasting light may just be a function of coming from daily espresso (which I did, too).
That said, something I love about pour over is how easy it is to experiment. If you’re using relatively light roast beans, you’ll struggle to over-extract, so I’d definitely try going finer just to see what it does. It may end up producing less of the flavors that were giving a seemingly over-extracted taste, or at least balancing them with the natural sweetness and body of the coffee.
If it’s a light roast, I might also (separately, so you can identify the effects of each change) try increasing the water temp. I do espresso at 89-90⁰C, but I’ll crank my pour over heat to 98.9, even with a fine grind–though again, only with a light roast. It’s MUCH easier to under-extract that in is to over with a light roast, and the effects of under-extraction can taste oddly similar to over-extraction with some beans.
If they aren’t light roasted beans, grinding finer or going hotter can increase bitterness, so you’ve just got a much slimmer target for a perfect cup, and you may have to accept some bitterness or some lightness to get everything else in line with what you’re looking for. What type of beans are you using, and at what temp? (Also, assuming you have a solid grinder?)
1ZPresso is amazing, just got the K-ultra a few months ago and it is my most consistent grinder, but hand grinding at espresso sizes is HARD. I’d run an experiment with your timemore and set it to near its finest grind and try to crank through 18-20g beans. You’ll be able to do it for sure, but just make sure it’s something you want to do every morning.
(Just for context, I’m a fairly fit guy used to hand grinding, but I have to get into position, hold the grinder against my leg, and lean over it to maximize torque in order to comfortably grind for espresso. I was shocked how different it was from even a fine pour over grind).
That said, if you have an electric screwdriver or a drill that can do super low RPMs, you can attach 1ZPresso grinders to those and basically make them electric/automatic.
You’re not gonna see it on a lot of real enthusiast’s lists, but I think the Breville Smart Grinder Pro at $200 is the best espresso grinder you can get (easily and consistently) below $300. I have a virtuoso+ that I was using for a while, and the cheaper SGP not only has MUCH greater micro-adjustability (it’s essentially stepless since you can set to any point in between clicks, but there are still steps technically), but the grinds are much more consistent at espresso sizes. I’ve established this myself with a precise sifter to remove boulders and fines (virtuoso+ produces many more of both) and seen online analyses that show the same. SGP wins against the more expensive baratza every time on grind quality.
The biggest/most common knock against it is that it isn’t built to be repaired as seriously as most Baratza, and some of the “smart” features aren’t that useful. However, being so much cheaper than anything but the cheapest baratzas, I’d buy two of these over the course of 10+ years for grind quality alone rather than spend just as much replacing burrs on a baratza, but not technically having to buy a new grinder.
And yeah, the ability to grind by “cups” rather than time isn’t helpful, I just do it by time, but it’s not like they made that more difficult by adding a second option. What IS helpful and won’t be found in any other grinder at the price, though, is a great portafilter switch and holder. Improves workflow, minimizes waste, and is just fun to use. I’d use a twist-on dosing funnel though so you don’t have to spill/waste any grounds at all when grinding straight into the portafilter.
In the end, I make decisions like this based almost exclusively on functionality at a given price point, and SGP is a rare case in which a cheaper option actually performs better when you get down to grind quality alone, and the espresso-specific build/attachments are nice.
I use a chamois cloth, seems to pick up oil/smudges even better that microfiber and need less washing. Also super easy to wash when it does need it. I basically just cut a dollar bill sized section off a natural off-brand sham-wow and it works better than anything else I’ve used
Make a big batch of pour over and just freeze the extra in an ice tray. Use that to ice hot coffee and you don’t have to change your recipe at all (though you can still use a slightly tighter ratio since cold things taste less, which is why I’ve cream needs such saturated flavoring and so much sugar).