Totally fair, on the tip side I’ll totally admit I’ve modified some to fit in my older Weller station I use as a dedicated heatset iron, it has heater cartridge that’s semicircular so the tips run the length of the iron. That said, I mainly do through hole and connector soldering, I’m not doing a lot of precision work, pretty much grabbed it because I was familiar with the iron and knew that it’d be comfortable for me. Think I use my heatset iron the most out of anything tbf, got me thinking about tools to recover inserts, that’d be super nice to have.

Oh for sure, totally appreciate that Weller is pricey, and I’d totally expect good tips on a knockoff to perform well. For me it’s going to come down to preference, wish I could try a bunch of different irons before buying, I at least had experience with wellers so I knew that I found them comfortable to work with and I’m not doing a ton of surface mount or fine stuff so meets my needs.

I’ll suggest Weller irons as a solid alternate as well, pretty much the only irons I’ve used in the last decade or so, mainly because the job I soldered in a lot used Wellers, had some lower end variable ones beat to hell in field bags that still run perfect today (actually my dedicated insert iron). I have a WE1010NA that I use now and it’s a solid tool.

100% a title that would struggle with full controller, for me it was cities skylines and rimworld. Also played a lot of warframe and spec ops:the line with mine, being able to have actions trigger at different points of the trigger pull was interesting, had a profile I grabbed for shooters that’d enable gyro aiming at the last bit of your trigger pull for fine adjustment and seriously, it works extremely well once you get used to it. The pads also supported osd rotary menus for hotkeys which was probably what the left pad got the most use out of, had the ability to set different behaviour too using mod buttons are by touching the rim of the pad. Also the haptic feedback on the pads was interesting, did a lot to make them feel more real, seriously had a really powerful piece of hardware with the og steam controller.

Totally was, it didn’t have rumble for battery life reasons, but didn’t miss it much at the time, barely used the rumble pack on the n64, think I got mine at EB games to try out the OOT secret hint feature (it’d buzz the pack if you were near a hidden secret), feedback has come a LONG way since then in terms of immersion.

I really liked the wavebird for the gamecube, unfortunately mine went into the aether on my last move, got bluetooth adapters to pair modern controllers with it but the wavebird was really cool at the time, was really amazing to not have to be tethered to the console and it being first party, though at the time the madcatz stuff was decent.

For recent controllers, I’ve been using a knockoff 360 controller for moonlight recently and after a lot of back and forth I really think MS nailed the controller setup back then (OG Xbox being decent but not a preference, I hated the duke, s controller was solid though), I like the xbone controllers as well, but IMO they’re just iterations on the 360 controller, easily my preference as an all rounder controller layout.

I have a steam controller, used it for a while but it’s been some time now, had some really great ideas, I’d totally go for an updated steamdeck style layout on that, probably a second for me.

I’ve had so much drift issues with ds4s that I personally don’t reach for a ds4 or dualsense for non playstation games, I like being able to swap batteries and the Xbox/Steam controllers all seem to have way better battery life in general, I keep a stock of rechargeables around so not generating piles of waste.

I found Freecad has become fairly intuitive if you already have traditional parametric cad experience, there’s definitely a few quirks but generally super easy to adapt to if you come from solidworks, inventor and the like, trying to convince my dad to give it a try as he’s been getting back into design since retiring and he’s been paying for a solid works license. Personally use ondsel but mainline freecad is totally useable.

Kinda sounds like combine infill layers in prusa/super slicer, that setting will have it do the perimeters as per normal but do infil at 1/2/3 etc layers, so 0.2 layers would get infill every 0.4 at 2, so it’ll print the perimeters and anything that can’t be merged, go to the next layer and do the perimeters and chunky infill, I use it to save time and I haven’t noticed much difference in functionality.

Yeah I recall the USAF deploying a ps3 cluster years ago

I don’t use mine much anymore but I still have it out, was a really cool idea and while it had a learning curve, definitely made controller gaming possible with a lot of titles, steam input in general these days is fantastic for that but even so I’d totally buy a steam deck layout steam controller v2.

I remember one of my engineering profs describing Midgley as the most environmentally destructive organism ever, Dude also was involved in the creation of freon.

Oh damage sponges are the worst, probably one of my biggest complaints with Bethesda’s games difficulty sliders generally just making things a slog, survival mode in fo4 is a good example to me of a challenge that doesnt make things an absolute pain, metro 2033 had a mode like that too that totally changed how you played the game, made it challenging without making it a slog.

The scadutree buffs are pretty big from what I can tell, I’ve got a bunch becauae I explore a lot on first runs and it seems to be at least 3-4% boost to attack and defenses, with some of the new talismans too found there’s a lot of stuff to work with.

So far, feels pretty well balanced, it has challenge but I’ve not encountered anything that made me question how I died, first few big fights were pretty well telegraphed and super enjoyable. What I really like is that you can go try something else if you hit a wall, go level up a bit, try new gear or different approaches

There’s room for accessibility options, no one is forcing you to use them. While there are tools in the souls series to solve issues, there’s no reason not to have some sort of scaling option at the least for people that want it, things like directional subtitles, colourblind mode, those are just basic. Why alienate players who would otherwise enjoy the game but may have limitations, it’s ok for games to have complex systems and themes that may not appeal to everyone, that’s totally independent of accessibility. I personally really enjoyed my playthroughs, and would love other people to be able to enjoy these games as well, and I’m pretty sure fromsoft intends for their games to be enjoyable.

Your point about rhythm games doesn’t support your point, guitar hero and rockband both had difficulty settings and later entries had nofail modes. They also had practice modes where you could slow down sections you were struggling with and work through it.

Quick edit: my only real complaint is FOV, camera is super zoomed in on some of the giant bosses, DS1 remastered supported ultrawide, would have been nice for Elden Ring to have that at leaat

Could have a bot that links to a git wiki, or even just a sidebar with knowledge base stuff would be nice for that.

Try the debian instructions instead here, there are instructions for raspberry pi os but they direct you to the debian page for 64bit raspberry pi os.

If that doesn’t work for you, definitely try the .deb route to install from a package

I’m a data engineer/architect and it’s the same over here, I get asked constantly “how can we stuff AI into this solution?”, never “should we consider using AI here? Is there a value?”, my view, people don’t understand their data and don’t want to put in the effort to understand their data and think that it’ll magically pull actionable insights from their dataswamp, nothing new, that’s been a constant for as long as I recall.

Like I totally understand the draw of new and exciting, but there’s so much you can do with traditional analytics, and in my view you really need to have a good foundation before doing anything else.

I’m also thinking that way wrt to “we need more fast charging for EVs to work”, I recall that plugging into a standard outlet will get you something like 5-8 km an hour, slow charging is totally acceptable for most people’s usages. If you’re in an area where block heaters are the norm you already have outlets at parking spots, if I could commute to work and plug it in, covers most commutes in a 8 hour day, even those of us who rarely go in and live 70k away I’d be getting most of my range back. For the amount I drive, level 1 charging is more than sufficient.

I think a compact with 2-300 k range would suit me just fine, would cover the odd longer trip and I’ll totally grab a rental for anything longer, like I already do it I need to move a fridge.

Totally get you, I swapped my prusa’s hotend for a stealthburner as well, they’re super nice to service, especially with the 2 part PCB, but having the entire assembly mounted from the front is fantastic.

Stealthburner ended up fixing your clog issues entirely?

Fingers crossed. There’s hats you can get to power the pi off of printer’s 24v supply, considering doing it on my klippered mk3s and switch that over to using a SBC instead of the laptop.

If you can swing it, definitely worth printing a spare set for the stealthburner + cw2, just in case you crack anything during assembly.